Digital Data Communications FCS-4200 Manual De Usuario

 

 

 

HTTP Port：

Select port 80 in general situations. If you want to use a port number other than 80, select the 

text box and enter a port number between 1024 and 65535. 

：

• When you have set the HTTP port number to a number other than 80 on the Network setting page or 

in the Setup Program, access the camera by typing the IP address of the camera on the web 

browser as follows:   

Example: when HTTP port number is set to 2000 Æ http://192.168.0.100:2000/ 

MAC Address：

Display the MAC address of the camera. 

Obtain IP automatically (DHCP)：

If a DHCP server is installed on the network, to select this while the IP 

address is assigned by the DHCP server. 

：

• When you set Obtain IP automatically (DHCP), make sure that the DHCP server is working on the 

network.  

Use the following IP：

Select this when a fixed IP address is set. 

IP Address：

Enter the IP address of the camera. 

Subnet mask：

Enter the subnet mask. 

Default Gateway：

Enter the default gateway. 

Obtain DNS server automatically：

If a DHCP server is installed on the network, to select this while the 

DNS server is assigned by the DHCP server. 

Use the following DNS server：

Select this when you set the fixed address as the IP address of DNS 

server. 

Primary DNS：

Enter the IP address of the primary DNS server.