Sony SNC-VL10P Manual De Usuario

Op
er

at

ions

 b

y

 Us

e

rs

Monitoring the Image from the Camera

12

Use this function to focus on a portion of the monitor 
image by masking over the other portion.  The focused 
portion is called “forcus area.”  By masking the image,  
the transmitting data size reduces and a higher frame 
rate is obtained.

To determine a new focus area on the image, click New 
Area.  Then drag the mouse to make a dotted frame on 
the area you want to set as the focus area and left-click.  
A new focus area is now set.

Click Enable Area to show the check mark to enable the 
focus area and mask over the non-focus area.

Click Disable Area to show the check mark to remove 
the masking and resume the normal image.

Selects the masking level from Level 1 to Level 5.  A 
higher masking level gives a larger masking density and 
higher frame rate.

Some of the focus area functions might not be operative 
depending on the viewer in use.

Selects the image quality from Level 0 to Level 9.  A 
higher level gives a higher quality image but the frame 
rate becomes lower.

Image Quality does not appear in the menu when you 
view the monitor image using the Firewall viewer.

When you click Capture, the monitor image freezes and 
the “Saving” dialog appears.  Type the file name, select 
the file format, specify the destination to which the file 
is to be stored, and click Save.
This function is the same as when you click the Capture 
icon on the image control section. (See “Capturing the 
monitor image” on page 11.)

Capture does not appear in the menu when you view the 
monitor image using the Java Applet viewer.

Focus area