Sony SIR-4160 Manual De Usuario

COLOR CCD CAMERA

User Guide

COLOR CCD CAMERA

User Guide

Please connect the video output terminal located on the back of the camera to the 
monitor.

CCD Camera

CCD Camera

Intermediate 

End monitor

Monitor

•  The connection method varies depending on the type of monitor and accessories.

Please refer to the user's manual for each instrument.

•  Please turn off the power when connecting.
•   Please select Hi-Z on the 75Ω/Hi-Z switch for the intermediate video TV set and 

select 75Ω for the Intermediate device as shown in the picture below.

The recommended adaptor specification for SIR-4160N/P is DC 12V/4A, AC 24V/2A 
over.
Please check the standard power requirement before connecting the power.
( Recommend AC 24A/2A over adaptor for a long-distance.)

When the resistance value of copper wire is at [20°C(68°F)]

Copper wire size(AWG)

#24(0.22mm

2

)

#22(0.33mm

2

)

#20(0.52mm

2

)

#18(0.83mm

2

)

Resistance value(Ω/m)

0.078

0.050

0.030

0.018

Voltage drop(V/m)

0.028

0.018

0.011

0.006

•   As shown in the table above, voltage decreases as the wire gets longer. 

Therefore having an excessively long distance between the power adaptor and the 
camera may affect the camera's performance.

✽

Standard voltage for camera operation : DC 12V±10% / AC 24V±10%

✽

There may be some deviation in voltage drop depending on the type of wire and the manufacturer.

• Please use a power adaptor that meets the required standards.
• Please connect the power after installation.

Notes