Lorex Technology LW2110 Manual De Usuario

Appendix D: Troubleshooting

If you have problems with your System, there is often a quick and simple solution. Please
try the following:

Problem

Solution

There is no picture from a
camera

• Check power to the camera. Make sure the adapter

is plugged in properly.

• Move the camera closer to the receiver.

The picture is dropping

• Move the camera closer to the receiver.
• Try repositioning the camera, receiver, or both to

improve the reception.

The picture is or has
become choppy

• The picture may become choppy when experiencing

a lower frame rate (e.g. 6 frames per second vs. a
higher 12 frames per second).

• Try moving the camera closer to the receiver.
• Remove obstructions between the receiver and

camera.

• Try switching to QVGA mode. Resolution will be

reduced but video frame rate will increase.

The picture appears to be
unsharp

• When viewing on a large screen TV or monitor

(especially high-definition televisions), the picture
might seem unsharp as the camera is limited to VGA
resolution (640x480 pixels), while the TV or monitor
supports a much higher resolution.

• For best performance, use with TV/monitor PIP

(Picture in Picture) function. Check your TV/Monitor
product manual to see if this feature is available on
your TV/Monitor.

The picture is white

• Common situation known as "washout" or "white

wash" where a strong light source is pointed at the
camera lens. The camera lens is not harmed during
a white wash.

• Do not point your camera towards a light source.

The picture is pixelated

• You may be in QVGA mode. Try switching to VGA

mode by pressing the Resolution button on the
receiver.