Panasonic WV-SP102E Manual De Usuario

36

36

37

Click the [Notification] tab on the "Alarm" page. (☞ Pages 13 and 14: How to display/operate the setup menu)
The settings relating to Panasonic alarm protocol can be configured in this section. 

■

[Panasonic alarm protocol]
Select "On" or "Off" to determine whether or not to pro-
vide notification by e-mail according to the settings for 
the "Alarm" checkboxes of "Destination of notification" 
below. 
 •  When an alarm is detected ("Alarm")
Default: Off

 •  When "On" is selected, notification of the alarm

occurrence will be provided to the registered desti-
nation addresses in order (to IP address 1 first, to IP 
address 8 last). 

 
[Destination port]
Select a destination port for the Panasonic alarm proto-
col from the following. 
Refer to the help window to infomation about the 
unavailable port number.
Available range: 1 - 65535
Default: 1818

[Retry times]
Select a retry time for the Panasonic alarm protocol. 
Available range: 0-30
Default: 2
     

■

[Address 1] to [Address 8]
Enter the destination IP address of the Panasonic alarm 
protocol from the following. Host name is unavailable 
for the IP address. Up to 8 destination addresses can 
be registered. 
"Alarm" checkbox: When the checkbox is checked, 

the Panasonic alarm notification will be provided 
upon an alarm occurrence. 

"Destination IP address" checkbox: Enter the desti-

nation address. 

To delete the registered IP address, click the [Delete] 
button respective to the desired IP address. 

 •  Confirm that the destination IP addresses are regis-

tered correctly. When a registered destination does 
not exist, notification may be delayed.