VIVOTEK IP8172 Manual De Usuario

 

 

This section explains how to control the Network Camera’s Pan/Tilt/Zoom operation. 

There are two ways to enable the camera control function:

1. 

Digital

: Control the e-PTZ operation. Within a field of view,it allows users to quickly move the 

focus to a target area for close-up viewing without physically moving the camera.       

2. 

Mechanical

: Connect the Network Camera to a PTZ driver or scanner via RS485 interface.

Advanced Mode

The e-PTZ control settings section will be displayed as shown below:

Select Stream: Select a video stream to set up the e-PTZ control. Please note that each stream can 

possess its own preset and patrol settings. For detailed information about how to set up preset and patrol 

Auto pan/patrol speed: Select the speed from 1~5 (slow/fast) to set up the Auto pan/patrol speed control.

Zoom factor display

If you check this item, the zoom indicator will be displayed on the home page when you zoom in/out the 

live viewing window as the picture shown on the next page. 

When completed with the e-PTZ settings, click 

Save to enable the settings on this page.