VIVOTEK IP8362 Manual De Usuario

 

 

Advanced Mode

Digital input: Select High or Low to define normal status for the digital input. The Network Camera will 

report the current status.

Digital output: Select Grounded or Open to define normal status for the digital output. The Network 

Camera will show whether the trigger is activated or not.

Set up the event source as DI on 

Event > Event settings > Trigger. Please refer to page 88 for detailed 

This section explains how to set up camera tamper detection. With tamper detection, the 
camera is capable of detecting incidents such as

 redirection, blocking or defocusing, or even 

spray paint.

Please follow the steps below to set up the camera tamper detection function:

1. Check 

Enable camera tampering detection.

2. Enter the tamper trigger duration. (10 sec. ~ 10 min.) The tamper alarm will be triggered only when the  

    tampering factor (the difference between current frame and pre-saved background) exceeds the 

    trigger threshold.

3. Set up the event source as Camera Tampering Detection on 

Event > Event settings > Trigger.