VIVOTEK IP8362 Manual De Usuario

 

 

Advanced Mode

This section explains how to control the Network Camera’s Pan/Tilt/Zoom operation. 

There are two ways to enable the function:

1. Mechanical: Connect the Network Camera to a PTZ driver or scanner via RS485 interface.

2. Digital: Control the e-PTZ operation. It allows users to quickly move the focus to a target 

area for close-up viewing without moving the camera physically. Please refer to page 85 for 

RS485 settings

If you select “Mechanical“, the RS485 Settings section will be displayed as shown below:

■ Disable: Select this option to disable this function.

■ PTZ camera: Select this option to enable PTZ operation. 

To utilize this feature, please connect the Network Camera to a PTZ driver or scanner via RS485 

interface first. Then you can configure the PTZ driver and RS485 port with the following settings.

VIVOTEK offers three PTZ drivers: DynaDome/SmartDOME, Lilin PIH-7x00, Pelco D protocol, Pelco 

P protocol, and Samsung scc643 protocol. If none of the above PTZ drivers is supported by your PTZ 

scanner, please select 

Custom camera (scanner). Please refer to the user’s manual of your PTZ 

scanner to determine the Camera ID, PTZ driver, and Port settings. The Camera ID is necessary to 

control multiple cameras. If you click 

Save to enable this function, the camera control panel will be