VIVOTEK SD8362E Manual De Usuario

 

 

Mute: Select this option to disable audio transmission from the Network Camera to all clients. Note that 

if mute mode is turned on, no audio data will be transmitted even if audio transmission is enabled on the 

Client Settings page. In that case, the following message is displayed:

External microphone input gain: Select the gain of the external audio input according to ambient 

conditions. Adjust the gain value from 1 (least) to 100 (most).

Audio type: Select audio codec AAC or GSM-AMR and the bit rate .

■ AAC provides good sound quality at the cost of higher bandwidth consumption. The bit rates are 

selectable from: 16Kbps, 32Kbps, 48Kbps, 64Kbps, 96Kbps, and 128Kbps.

■ GSM-ARM is designed to optimize speech quality and requires less bandwidth. The bit rates are 

selectable from: 4.75Kbps, 5.15Kbps, 5.90Kbps, 6.7Kbps, 7.4Kbps, 7.95Kbps, 10.2Kbps, and 

12.2Kbps.

■ G.711 also provides good sound quality and requires about 64Kbps. Select pcmu (μ-Law) or pcma 

(A-Law) mode.

When completed with the settings on this page, click 

Save to enable the settings.

The network camera does not come with embedded microphone. An external microphone will be 
necessary especially if you configure the Audio detection feature. By default, the Audio setting is 
muted, and you need to manually uncheck the Mute option.