JVC TK-C215VP12U/E Manual De Usuario

After setting is complete, mount the inner dome 
to the camera.

Mount the inner dome to the 3 clips.

● Mount the inner dome such that it does not 

cover the lens.

● When mounting the inner dome, make sure 

not to move the position of the lens. Doing so 
may cause the preset angle of view to go out 
of alignment.

Before mounting, remove any dust or dirt from 
the dome cover.

● Dirt that is not removed from the cover before 

mounting may appear on the camera’s 
image.

● Do not apply excessive force to the dome 

cover such as stretching it. 

Mount the dome cover by aligning the 3 position 
marks on the base with the dome cover.

Fasten by tightening the 3 fastening screws of 
the dome cover using the wrench supplied.

Clip(x 3)

Inner 
Dome

*TK-C215VP4 is used in the above illustration

Position Alignment Mark (x 3)

Wrench 
(Supplied)

*TK-C215VP4 is used in the above illustration

TK-C215VP4_JP.book  Page 30  Thursday, November 2, 2006  10:51 AM