ZyXEL Communications 3.1 Manual De Usuario
Chapter 44 Packet Flow Explore
ZyWALL (ZLD) CLI Reference Guide
335
The following example shows all activated dynamic VPN rules.
The following example shows all activated static-dynamic VPN rules.
The following example shows all activated policy routes which use SNAT.
The following example shows all activated 1-to-1 NAT rules.
The following example shows all activated policy routes which use SNAT and enable NAT loopback..
The following example shows all activated 1-to-1 NAT rules.
Router> show system route dynamic-vpn
No. Source Destination VPN Tunnel
===========================================================================
Router> show ip route static-dynamic
Flags: A - Activated route, S - Static route, C - directly Connected
O - OSPF derived, R - RIP derived, G - selected Gateway
! - reject, B - Black hole, L - Loop
IP Address/Netmask Gateway IFace Metric Flags Persis
t
===========================================================================
0.0.0.0/0 10.1.1.254 wan1 0 ASG -
Router> show system snat policy-route
No. PR NO. Outgoing SNAT
===========================================================================
Router> show system snat nat-1-1
No. VS Name Source Destination Outgoing SNAT
===========================================================================
Router> show system snat nat-loopback
Note: Loopback SNAT will be only applied only when the initiator is located at the
network which the server locates at
No. VS Name Source Destination SNAT
===========================================================================
Router> show system snat nat-1-1
No. VS Name Source Destination Outgoing SNAT
===========================================================================