Canon VB101 Manual De Usuario
Setup Procedures
3
59
Detail Settings
On-board File System Information
The On-board File System displays the used
space, free space and capacity (used space
+ free space) in bytes.
The On-board File System displays the used
space, free space and capacity (used space
+ free space) in bytes.
Slot A/B
If a PC card, used for communications and
storage, is inserted into the slot, the
"Manufacturer" and "Product Information" is
displayed. Depending on the card type and
its status, the operation buttons are
displayed and the card status can be
controlled. The card slots are labelled A and
B from the bottom upwards.
If a PC card, used for communications and
storage, is inserted into the slot, the
"Manufacturer" and "Product Information" is
displayed. Depending on the card type and
its status, the operation buttons are
displayed and the card status can be
controlled. The card slots are labelled A and
B from the bottom upwards.
Recorded Picture Information and
Manipulation
This section displays the number of
recorded pictures and the status of recorded
picture processing. The maximum number of
pictures that can be recorded is 10000. Under
certain circumstances, the "Rebuild" button
for "Rebuilding of recorded picture list" and
the "Delete" button for "Deletion of recorded
pictures" may be displayed, and if the
pictures cannot be recorded the reason will
be displayed.
Manipulation
This section displays the number of
recorded pictures and the status of recorded
picture processing. The maximum number of
pictures that can be recorded is 10000. Under
certain circumstances, the "Rebuild" button
for "Rebuilding of recorded picture list" and
the "Delete" button for "Deletion of recorded
pictures" may be displayed, and if the
pictures cannot be recorded the reason will
be displayed.
"Rebuilding of recorded picture list"
Normally, there is no need to reconstruct
the picture list. Click "Rebuild" button if
you have removed a memory card and
modified the content of that memory card
(erased files, etc.) on another PC.
Normally, there is no need to reconstruct
the picture list. Click "Rebuild" button if
you have removed a memory card and
modified the content of that memory card
(erased files, etc.) on another PC.
"Deletion of recorded pictures"
Deletes pictures recorded on a card.
Specify the Delete criteria below and then
click the "Delete" button.
Deletes pictures recorded on a card.
Specify the Delete criteria below and then
click the "Delete" button.
"Time"
Select the period of time following the
recording of the pictures after which the
pictures are deleted.
Select the period of time following the
recording of the pictures after which the
pictures are deleted.
"Event"
Select whether the pictures to be
deleted are those where recording was
performed in response to inputs from an
external device or according to a
schedule. You can also select a
combination of the two.
Select whether the pictures to be
deleted are those where recording was
performed in response to inputs from an
external device or according to a
schedule. You can also select a
combination of the two.
"Camera"
Select camera by which the pictures
were recorded.
Select camera by which the pictures
were recorded.
Miscellaneous
"View Current Settings"
Displays a list of current settings.
Displays a list of current settings.
"Reboot"
Reboots the VB101.
Reboots the VB101.
"Restore Settings"
All but the Basic Settings, System settings and Network
settings will be restored to the factory default settings.
Click "Restore"-"OK" button and the VB101 will be
rebooted automatically.
All but the Basic Settings, System settings and Network
settings will be restored to the factory default settings.
Click "Restore"-"OK" button and the VB101 will be
rebooted automatically.
Administration Tools Settings Page
Click the [Cancel] button to exit from this page. This returns you to the
settings title page.
e
Tip
We recommend that you make a note of current server settings before you
restore the default settings in "Restore Settings" (
→ P.160).