Clover Electronics HDC100 Manual De Usuario

•  To avoid electrical shock, do not open the case of this product. 
•  Operate this product using only the supplied AC Power supply. 
•  Do not overload electrical outlets or extension cords; this can result in fire or electric 

shock. 

•  Keep this product away from strong magnetic fields. 
•  Do not expose this product in direct sunlight or strong reflected rays. 
•  Refer servicing to qualified personnel only. 
•  Do not change or modify this product, the warranty will be voided. 
 
 
 
 
 

•  Weatherproof (IP67) 
•  1/3” Sony Super HAD CCD 

•  520 TV Lines of Resolution 

•  Rugged Steel Construction 
•  Total 38 Infrared LEDs with a CDS sensor 

•  60’ IR range (depends on scene reflection) 

•  Attached Mounting Base (for ceiling & wall) and 100’ cable 
•  DC12V Power Source 
 
 
 
 

 

1.  Loosen the two locking screws① with provided hex-head wrench and remove the 

mounting base.. 

2.  Attach the mounting base② to the wall or ceiling, wherever you want to install the 

camera. Locate a wall stud or ceiling joist and secure the mounting base using the 
supplied screws③. Attach the camera④ to the mounting base ② and secure them 
turning the two locking screws① with provided hex-head wrench clockwise.  

3.  How to set angle of view:  
 

Loosen the two locking screws① with provided hex-head wrench and set the desired 
angle of camera toward objects by moving the camera right /left and up/down.   

4.  Connect the one end of 100’ cable (supplied) to the Din jack of 5’ cable attached to 

the camera. Make sure that two arrows on the top of them should be aimed at each 
other. Connect the other end (BNC or RCA) of cable to the video devices such as 
DVR, monitor/TV. Plug the provided AC adapter to the DC jack (red) of the end of 
100’ cable.