Petsafe PIG00-10773 Manual De Usuario

22 

Follow all safety instructions for your power tools. Be sure to 
always wear your safety goggles.

Sidewalk (7C): Place 
the Boundary Wire in a 
convenient expansion 
joint or create a groove 
using a circular saw and 
masonry blade. Place the 
Boundary Wire in the 
groove and cover with an 
appropriate waterproofi ng 
compound. For best 
results, brush away dirt 
or other debris before 
patching.

 Place the Boundary Wire in a PVC pipe or 

water hose to protect the Boundary Wire before burying.

The Boundary Flags are visual reminders for your pet of where the Warning Zone 
is located. 

Place the Test Light 

1. 

contacts on the 
contact points and 
hold the Receiver 
Collar at your pet’s 
neck height. 
Walk towards the 

2. 

Warning Zone until 
the Receiver Collar 
beeps (8A). 
Place a Boundary Flag 

3. 

in the ground (8B). 
Walk back into the

4. 

Boundary  

Wire 

Pet Area until the beeping stops.
Repeat this process around the Warning Zone until it is marked with Boundary 

5. 

Flags every 10 feet. 

To prevent an unintended corection, after the Boundary Flags have 
been placed, be sure to set the static correction on the Receiver 
Collar back to level 1 Tone Only.

8