Clover Electronics HDC211 Manual De Usuario

•  To avoid electrical shock, do not open

 

the case of this product. 

•  Do not stamp fingerprints on the lens. 
•  Operate this product using only the recommended AC Power supply. 
•  Do not overload electrical outlets or extension cords; this can result in fire or electric 

shock. 

•  Keep this product away from strong magnetic fields. 
•  Do not expose this product in direct sunlight or strong reflected rays. 
•  Refer servicing to qualified personnel only. 
•  Do not change or modify this product, the warranty will be voided. 
 
 
 
 
 
•  Weatherproof (IP67) 
•  1/3” Sony Super HAD CCD 

•  High Resolution 550 TV Lines (Color), 600 TV Lines (B/W) 

•  True Day/Night (Built-in ICR: IR Cut Filter Removal)  
•  3D DNR (Digital Noise Reduction) with 3D filter 

•  D-WDR (Digital Wide Dynamic Range) 

•  3-Axis Gimbals Bracket 
•  Total 33 Infrared LEDs with a CDS sensor 

•  Up to 100’ IR range (depends on scene reflection) 

•  DC Auto Iris Vari-focal Lens (2.8-12mm) 
•  Dual Voltage(AC 24V/DC 12V) 
 
 
 
 
1.  Loosen the locking screw① with the provided hex-head wrench and turn the locking 

ring② counter-clockwise to remove the transparent dome③. 

2.  Attach the camera base④ to the wall or ceiling, wherever you want to install the 

camera. Locate a wall stud or ceiling joist and secure the camera base④ using the 
supplied screws⑤.  

3.  How to set angle of view:  
 

-  Loosen the screws⑥ for tilting and adjust the camera direction by moving the 
 camera body⑧ up or down, then fix the screws firmly. 

 

-  Turn the mounting bracket (metal part) covering the camera body⑧ left or right for 
 panning adjustment. 

 

-  Loosen the locking knob⑦ and turn the camera body⑧ clockwise or counter-
  clockwise to upright images on the screen.