Cisco Systems 6807-XL Manual De Usuario
If the system is powered on and PSC is installed properly, the PSC STATUS LED is green.
Figure 18: Installing the PSC
Mounting screws (one for each PSC)
2
Power rail connectors
1
Removing the Power Supply Converter
To remove the PSC, perform these steps:
Before You Begin
• Ensure that the system (earth) ground connection has been made. For ground connection instructions,
see
Establishing System Ground, on page 41
.
• You may require a flat-blade or Number 2 Phillips-head screwdriver to loosen the screw on the PSC.
Cisco Catalyst 6807-XL Switch Hardware Installation Guide
58
OL-30656-01
Removing and Replacing FRUs
Removing the Power Supply Converter