TEAC LP-P1000 Manual De Usuario

 

o

Do not place anything on the turntable cover. 
Objects on the cover might cause noise due to vibra-
tions or fall off, especially during playback.

 

o

Avoid placing the unit in direct sunlight, close to 
a source of heat or in other similar conditions. Do 
not place the unit on top of an amplifier or other 
equipment that might generate heat that exceeds 
the operating temperature range of this unit. 
Doing so could cause discoloration, deformation or 
malfunction.

 

o

As the unit could become warm during operation, 
always leave sufficient space around it for ventila-
tion. When installing this unit, leave at least 20 cm 
(8") between it and walls. To allow good heat dis-
sipation, leave a little space between it and other 
devices.  When placing it in a rack, for example, leave 
at least 40 cm (16") open above it and 10 cm (4") 
open behind it.  Failure to provide these gaps could 
cause heat to build up inside and result in fire.

 

o

DO NOT MOVE THE UNIT DURING PLAYBACK. During 
playback, the disc or the record rotates. Do not lift or 
move the unit during playback. Doing so may dam-
age the disc, the record, the stylus, the cartridge or 
the unit.

 

o

Always remove the disc or the record before relocat-
ing or moving this unit. Moving the unit with a disc 
inside or a record on the turntable could damage the 
disc, the record, the stylus and the cartridge or could 
cause a malfunction.

 

o

The voltage supplied to the unit should match the 
voltage as printed on the rear panel. If you are in any 
doubt regarding this matter, consult an electrician.

 

o

Do not open the cabinet as this might result in dam-
age to the circuitry or electrical shock. If a foreign 
object should get into the unit, contact your dealer 
or TEAC customer support.

 

o

When removing the power plug from the wall outlet, 
always pull directly on the plug, never yank on the 
cord. 

 

o

When a TV is on, depending on the TV broadcast 
electromagnetic wave conditions, lines might appear 
on the TV screen if the unit is turned on. This is not a 
malfunction of the unit or the TV. If this occurs, put 
this unit into standby mode (off ) when using the TV. 

Customers in the USA, please visit the TEAC website 
(http://audio.teac.com/support/registration/) to register 
as a user online.

If the surface of the unit gets dirty, wipe it with a soft 
cloth or use diluted mild liquid soap. Allow the surface 
of the unit to dry completely before using.
Do not use chemical cleaning cloths, thinner or similar 
substances as they could damage the surface of the 
unit.

V