Pioneer HD-V9000 Manual De Usuario

En

 Other settings (Options)

1. • The 

LCD button always operates (remains unlocked), regardless of the Front Key setting.

• To temporarily unlock operation of the buttons on the main unit’s front panel, press the 

LCD, ENTER and RETURN buttons on the front 

panel simultaneously for over one second. This only enables operation temporarily, and does not change the 

Front Key setting.

2. This cannot be changed during playback.
3. The 9-pin and 15-pin connectors cannot be used simultaneously for RS-232C signal transfer.
4. The following settings are restored to the defaults set upon purchase.

• All 

Video Settings items

• All 

Audio Settings items

• The following 

Network Settings items

– 

– 

– 

• All 

Initial Settings items aside from Clock Setting.

Clock Setting

Year/Month/Day/
Hour/Minutes/
Seconds

Sets the date and time of this unit’s internal clock.

Front Key

Unlocks operation of the buttons on the main unit’s front panel.

Disable

Locks operation of the buttons on the main unit’s front panel.

1

File Play Mode

2

The stop mode is set after one file is played to the end.

All

When playback of one of the video files in the 

video folder on the SD memory card is 

finished, the next file in the sorted order is played.

Repeat Mode

2

Playback is not repeated.

On

The file(s) is (are) played repeatedly. (Which files are played depends on the 

File Play Mode 

setting.)

Serial Port

9Pin

Select this when connecting a computer to this unit’s RS-232C terminal using a 9-pin cross 
cable (commercially available).

Select this when connecting a computer to this unit’s EXT TERMINAL connector.

3

Baud Rate

2400

Sets the RS-232C terminal’s transfer rate to 2400 bps.

4800

Sets the RS-232C terminal’s transfer rate to 4800 bps.

Sets the RS-232C terminal’s transfer rate to 9600 bps.

19200

Sets the RS-232C terminal’s transfer rate to 19200 bps.

Extend Terminal

Sets the EXTEND TERMINAL button function to the preset standard.

User

Sets the EXTEND TERMINAL button function to the desired value (page 57).

Auto Power Off

Disable

The power does not turn off automatically even if no operation is performed for the specified 
time.

The power turns off automatically (is set to standby) if no button is operated or there is no 
command control or access from the LAN for over 2 hours when no SD memory card is 
loaded.

Initialize

2

No/Yes

When 

Yes is selected, this unit’s settings are restored to the defaults set upon purchase.

4

 

Turn the power off then back on.