JVC KD-ADV49 Manual De Usuario

ENGLISH

60

Phone Connect/Audio Connect Only for the registered devices.

Establish the connection with the registered device, 

 [32]

Only for the device being connected.
Disconnect the current device before connecting another device, 

 [32]

Only for the registered devices.
Delete the registered devices, 

 [33]

Enter the PIN code to establish the connection, 

 [32]

Once the connection is established, it is registered in the unit. You 
can connect the unit and the device by using <Phone Connect>/
<Audio Connect> (

 above) from the next time on.

When the unit is turned on, the connection is established automatically 
with...
Off: No Bluetooth device.
Last: The last connected Bluetooth device.

Off: The unit does not answer the calls automatically. Answer the calls 
manually.
On: The unit answers the incoming calls automatically.
Reject: The unit refuses all incoming calls.

On: The unit informs you of the arrival of a message by ringing and 
displaying “Receiving Message.”
Off: The unit does not inform you of the arrival of a message.

Copy the phone book memory of a cellular phone into the unit. You can 
register up to 50 phone numbers, 

 [35]

Adjust the built-in microphone volume.
01, 02, 03

Adjust the phone volume.
00 to 30 or 50

*1

, Initial 15

Initialize all settings you have made in 

<Bluetooth>

.

Yes: Initializes the settings.
No: Cancels.

The following information is shown:
Name: The unit name
Address: The Mac address of the unit
Version: The Bluetooth software/hardware versions

*2

Phone Device/Audio Device: The connected device names

1

2

When operating the Bluetooth device, refer also to the instructions supplied with the device.

EN_KD-ADV49AVX44[JC]ff.indb   60

08.1.18   8:10:32 PM