TANDBERG D13898.04 Manual De Usuario

Descargar
Página de 143
11
TANDBERG 
CONTENT SERVER 
USER GUIDE
D 13898.04
DECEMBER 2006
For your protection please read these safety 
instructions completely before you connect 
the equipment to the power source. Carefully 
observe all warnings, precautions and 
instructions both on the apparatus and in these 
operating instructions. 
Retain this manual for future reference.
Water and Moisture
Do not operate the apparatus under or near 
water – for example near a bathtub, kitchen 
sink, or laundry tub, in a wet basement, near 
a swimming pool or in other areas with high 
humidity.
Never install jacks for communication cables 
in wet locations unless the jack is specifically 
designed for wet locations. 
Do not touch the product with wet hands.
Cleaning
Unplug the apparatus from communication 
lines, mains power-outlet or any power source 
before cleaning or polishing. Do not use liquid 
cleaners or aerosol cleaners. Use a lint-free 
cloth lightly moistened with water for cleaning 
the exterior of the apparatus. 
Ventilation
Do not block any of the ventilation openings 
of the apparatus. Never cover the slots and 
openings with a cloth or other material. Never 
install the apparatus near heat sources such 
as radiators, heat registers, stoves, or other 
apparatus (including amplifiers) that produce 
heat. 
Do not place the product in direct sunlight or 
close to a surface directly heated by the sun.
Lightning
Never use this apparatus, or connect/
disconnect communication cables or power 
cables during lightning storms.
Dust
Do not operate the apparatus in areas with high 
concentration of dust.
Vibration
Do not operate the apparatus in areas with 
vibration or place it on an unstable surface.
Power Connection and Hazardous Voltage
The product may have hazardous voltage 
inside. Never attempt to open this product, 
or any peripherals connected to the product, 
where this action requires a tool
This product should always be powered from 
an earthed power outlet
Never connect attached power supply cord 
to other products
In case any parts of the product has visual 
damage never attempt to connect mains 
power, or any other power source, before 
consulting service personnel
The plug connecting the power cord to the 
product/power supply serves as the main 
disconnect device for this equipment. The 
power cord must always be easily accessible
Route the power cord so as to avoid it being 
walked on or pinched by items placed upon 
or against it. Pay particular attention to the 
plugs, receptacles and the point where the 
cord exits from the apparatus
Do not tug the power cord
If the provided plug does not fit into your 
outlet, consult an electrician
Never install cables, or any peripherals, without 
first unplugging the device from it's power source.

Servicing
Do not attempt to service the apparatus 
yourself as opening or removing covers may 
expose you to dangerous voltages or other 
hazards, and will void the warranty. Refer all 
servicing to qualified service personnel. 
Unplug the apparatus from its power source 
and refer servicing to qualified personnel under 
the following conditions: 
If the power cord or plug is damaged or 
frayed 
If liquid has been spilled into the apparatus
If objects have fallen into the apparatus 
If the apparatus has been exposed to rain 
or moisture 
If the apparatus has been subjected to 
excessive shock by being dropped 
If the cabinet has been damaged
If the apparatus seems to be overheated 
If the apparatus emits smoke or abnormal 
odor
If the apparatus fails to operate in 
accordance with the operating instructions.




Accessories
Use only accessories specified by the 
manufacturer, or sold with the apparatus.
Communication Lines
Do not use communication equipment to report 
a gas leak in the vicinity of the leak.
Safety Instructions