Diamond Multimedia DV175 Manual De Usuario

 

9

 

9

If you are using an Apple Macintosh, change the resolution by doing the 

following: 

MacOS 8.x/9.x 

1. 

Click the Apple icon at the top, left corner of the screen, select Control 

Panel and then select Monitors. 

2. 

Select a resolution of 1280 x 1024 pixels with between 60Hz and 75Hz 

refresh rate. 

3. 

If refresh rates of 60Hz or 75Hz are not available, click Recommended in 

the Show drop-down box and change it to All. Select the resolution and 

refresh rate as above. 

A colour depth of either Thousands or Millions is recommended. 

MacOS X 

1. 

Click the Apple icon at the top, left corner of the screen, select System 

Preferences and then select Displays. 

2. 

Select a resolution of 1280 x 1024 pixels with between 60Hz and 75Hz 

refresh rate. 

3. 

A colour depth of either Thousands or Millions is recommended. 

There is no need to choose the highest possible refresh rate when using an 
LCD monitor. It is not technically possible for an LCD monitor to flicker. Even at 
a refresh rate of 60 Hz you will get an absolutely flicker-free image.  

For best results, it is important that you set the graphics adaptor to use one of 
the monitor’s preset display modes shown in Table 1 on the next page. Other 
graphics signals may be displayed poorly or not at all. Note that the DV175’s 
preset modes correspond to VESA or Apple Macintosh standard graphics 
signals for these resolutions. All recent models of graphics adaptor should be 
able to support these modes. For the native resolution of 1280 x 1024 pixels, 
for example, refresh rates of 60, 70 and 75 Hertz are supported.