IBM T117 Manual De Usuario

Driver Installation for Windows VISTA

This section must be completed

before continuing with the Windows

VISTA

Auto Setup

on page 13

On LCD monitors, unlike

CRTs, a faster refresh rate

does not improve display

quality .IBM recommends using

either 1280 x1024 at a fresh rate of

60Hz or 640 x480 at a refresh rate of

60H

To install the device driver in use the Plug and Play feature in Microsoft

Windows

Vista files should be loaded from the IBM Monitor CD.

1. Turn off the computer and all attached devices.

2. Ensure that the monitor is connected correctly.

3. Turn on the monitor and then the system unit. Allow the system to boot

into Windows Vista

4. Open

the

DISPLAY PROPERTIES

window by clicking

START

CONTROL

PANEL

and then double-clicking the

Personalization

icon.

5. Click

the

Display Settting

button.

6. Click

the

Advanced Setting

button

7. Click

the Monitor tab.

8. Click the

Properties

button, Click the Continue button .

9. Click

the

DRIVER

tab.

10. Open the “Update Driver Software-Generic PnP Monitor” window by

clicking on

Update Driver

and then click the

“Browse my computer for

driver software”

button.

11. Select the “Let me pick from a list of device on my computer”

12. Insert the Setup CD into the CD drive: and click the

HAVE DISK

button.

13. Ensure that the CD drive letter is selected.

14. Click OK.

15. Choose X:\driver\windows vista driver\IBM4943/4944 and click OK.

The files will be copied from the CD to your hard disk drive.

(where X is the drive letter designator for the CD-ROM drive).

16. Close all open windows and remove the CD.

17. Restart the system.

The system will automatically select the maximum refresh rate and
corresponding Color Matching Profiles.