EarthQuake CS3814 Manual De Usuario

Check for parts online at 

www.getearthquake.com or call 800-345-6007 M-F 8-5

19

Operator's Manual

8.  File ONLY on the “Push” stroke, do not pull the file against any

metal object as this will damage the file.

It is also important to maintain the depth gauge setting 

throughout the lifespan of the saw chain.  91VG and 91P chains 

use a depth setting of .025”. This setting should be checked and

corrected every third or fourth time the saw chain is sharpened.      
1. Place the correct depth-gauge tool over the chain, with one 

depth gauge protruding through the slot in the tool.

2.  If the depth gauge extends above the slot, use a flat file to bring 

the depth gauge flush with the top of the tool.  Use only the 

push stroke of the file.  Pulling the file will damage the file.

3. Make sure to round over the leading edge of the depth 

gauge to prevent kickbacks and tie strap breakage. 

When storing the chainsaw for periods of three months or 

longer: 
1. Empty and clean the fuel tank in a well-ventilated area.
2.  Dispose of fuel properly.  Local regulations may apply.  Contact 

your local government or hazardous material service for 

instructions.

3. Run the engine until the carburetor is dry.  This will draw the 

fuel out of the carburetor, preventing costly repairs to clean 

gummed fuel from the fuel system.

4. Remove the saw chain and guide bar.  Clean them thoroughly 

and treat with a rust preventative before storing.

5. Thoroughly clean the chain saw.  Remove sawdust and 

excess bar and chain oil from the clutch cover and the area 

surrounding the clutch.  Pay close attention when cleaning 

the cylinder cooling fins and the air filter.

6. Store the unit in a dry location, out of the reach of children 

and other unauthorized users.

At Earthquake, we build quality and durability into the design 

of our products; but no amount of careful design by us, and 

careful maintenance by you, can guarantee a repair-free life 

for your Earthquake Chainsaw.  Most repairs will be minor, and 

easily fixed by following the suggestions in the troubleshooting 

guide in this section.
The guide will help you pinpoint the causes of common problems 

and identify remedies.
For more complicated repairs, you may want to rely on your 

retailer, an authorized service center or Earthquake. A parts 

breakdown is located toward the end of this manual.
We will always be glad to answer any questions you have, or help 

you find suitable assistance. To order parts or inquire about war-

ranty, call or e-mail us using the contact information found below.

Parts can be obtained from the store where the chainsaw was 

purchased or direct from the factory. To order parts visit www.

getearthquake.com or call 1-800-345-6007.  
For other general questions, you can e-mail us at info@ardisam.

com.

Please include the following information with your order:
1)  Part numbers
2)  Part description
3) Quantity
4)  Model number and serial number