IBM 343 Manual De Usuario
64
xSeries 343 Hardware Maintenance Manual
Replacing Hard Disk Drives
To replace a hard disk drive, follow this procedure:
1. Remove the bezel.
2. Disconnect the cables (B in Figure 12) from the connectors on the front of the hard disk drive
2. Disconnect the cables (B in Figure 12) from the connectors on the front of the hard disk drive
bay (A in Figure 12).
Figure 12. Disconnecting the Hard Disk Drive Bay Cables
3. Use the handles to pull the hard disk drive bay out of the chassis. Place it on a clean static-free
work surface.