Oregon 91VG Prospecto
TOP-PLATE FILE HANDLE DEPTH-GAUGE SETTING:
FINISHED
FILING ANGLE: DOWN ANGLE:
*
See warning below
CUTTER:
30˚
For more information on these and other Oregon® products, contact your authorized Oregon® distributor, or:
OREGON CUTTING SYSTEMS DIVISION, BLOUNT, INC.
PO Box 22127 · Portland, OR, U.S.A. 97269-2127
Phone: 503-653-8881 Fax: 503-653-4201 Web: http://www.oregonchain.com
IN CANADA: OREGON DISTRIBUTION LTD.
505 Edinburgh Rd. N., Guelph, Ontario, Canada N1H 6L4
Phone: 519-822-6870 Fax: 519-822-4999 Printed in USA 91VG F&B A107041 AA 0806
*
*
Hand Filing Instructions OREGON 91VG
®
TOP-PLATE TOP-PLATE DEPTH-GAUGE SETTING:
FINISHED
GRINDING ANGLE: SHARPNESS ANGLE: DOWN ANGLE: *See warning below
CUTTER:
30˚
FILE SIZE: Use a 5/32” round file and file guide
Grinding Instructions OREGON ® 91VG
NOTE: Individual parts packages contain 25 pieces.
Chain Replacement Parts
Chain Type
Left-hand Cutter
Right-hand Cutter Tie Strap
Preset Tie Strap
Drive Link
91VG
P21693
P21694
P24295
P25068
P21721
Maintenance Tools
File Size
Assembled File
Guide
Round Files
Depth Gauge
Tool, .025”
Flat File
Bench Grinder
Wheel 5 3/4”
Mini Grinder
Wheel, 4 1/8”
5/32”
37534 (EA.)
70504 (12-PK.)
40458 (2-PK.)
22290 (10-PK.)
12211 (12-PK.)
OR534-18
OR4125-18
GRINDING WHEEL THICKNESS: 1/8”
these
Oregon® 91VG saw chain is low-kickback saw chain. It met the
kickback performance requirements of ANSI B175.1 (US) and
CSA Z62.3 (Canada) when tested on a representative sample of chainsaws. Its safety features
significantly reduce the hazard of kickback while maintaining high-cutting performance.
ALL CUTTING SAW CHAIN CAN KICKBACK, which may result in severe injury to the saw
operator or bystanders. Operate your saw safely. Read and follow all warnings
in your chainsaw operator’s manual.
Failure to follow filing instructions can increase
the level of kickback which can result in severe
injury to the saw operator or bystanders.
Do not exceed the depth-gauge setting shown above
Always file depth gauges back to their original rounded or ramp
shape after lowering
.0˚
.0˚
.025”
.025”
50˚