Alamo TW84 Manual De Usuario

TW84  03/07

Operation Section 4-42

© 2007 Alamo Group Inc.

CUTTER VIBRATES

Blade locked back.

Loosen locked Blade.

Drivelines not phased.

Replace Driveline.

Blade broken.

Replace Blades in sets.

Blade Carrier bent.

Repair or replace Carrier.

Blade Hub not properly

Remove Hub, check for wear

seated on Shaft.

and replace or seat properly.

blades changed at the same

blades.

time?
Blade Broken.

Replace blades, in set.

Blade Carrier Bent.

Replace carrier.

Blade hub not properly

Remove hub, check tapered spline

seated on shaft.

clean and replace.

New Blade matched with

Replace Blades in sets.

worn Blade.

Not Cutting Clean

Blades dull.

Sharpen or replace Blades.

Blade rotation incorrect.

Use correct Blade for Carrier.

Using Straight Blades.

Use Fan Blades in grass.

Carrier RPM too low.

Increase PTO speed. 

Mower not level.

Adjust  machine level (in very
heavy weeds, 1/2" to 1" low in front).

Tractor tires mashing down grass.

Use offset adapter to move cutter to

the left.

Ground speed too fast.

Reduce ground speed by shifting to a
lower gear.

Arrange the chains so that when tightened, the

chains are pulling downward and against

themselves.  Carefully tighten the securing chains or

other fasteners using boomers or binders to apply

maximum tension.  Use extreme care when

attaching and removing the securing devices as the

extreme tension involved when released has the

potential to inflict serious injury. 

While hauling the tractor and implement, make

occasional stops to check that the tractor and

implement have not moved or shifted and that the

securing chains have maintained tension.  If during

transport a hard braking, sharp turning, or swerving

action was performed, stop at the next safe location

to inspect the security of the load.  OPS-U- 0026