Land Pride RCD1884 Manual De Usuario

12/15/15

The Online Warranty Registration or Warranty 
Registration card should be completed by the dealer at 
the time of purchase. This information is necessary to 
provide you with quality customer service.

The parts on your Rotary Cutter have been specially 
designed by Land Pride and should only be replaced with 
genuine Land Pride parts. Contact a Land Pride dealer if 
customer service or repair parts are required. Your Land 
Pride dealer has trained personnel, repair parts, and 
equipment needed to service the implement.

Model No. _____________Serial No. _______________

For quick reference and prompt service, record model 
number and serial number in the spaces provided above 
and again on warranty page 35. Always provide model 
number and serial number when ordering parts and in all 
correspondences with your Land Pride dealer. Refer to 
Figure 1 for location of your serial number.

Your dealer wants you to be satisfied with your new 
Rotary Cutter. If for any reason you do not understand 
any part of this manual or are not satisfied with the 
service received, the following actions are suggested:

1.

Discuss the matter with your dealership service 
manager making sure that person is aware of any 
problems you may have and has had the opportunity 
to assist you.

2.

If you are still not satisfied, seek out the owner or 
general manager of the dealership, explain the 
problem, and request assistance.

3.

For further assistance write to:

P.O. Box 5060

Salina, KS. 67402-5060

E-mail address

lpservicedept@landpride.com

30976

Land Pride welcomes you to the growing family of new 
product owners.

This Rotary Cutter has been designed with care and built 
by skilled workers using quality materials. Proper 
assembly, maintenance, and safe operating practices will 
help you get years of satisfactory use from this machine. 

The Land Pride RCD1884 offset Rotary Cutter is 
designed and built to clear grass, weeds, and light brush 
up to 1 1/2 inches in diameter from areas under orchard 
and grove trees, beneath over-hanging hedge rows, or 
under fence lines and guard railings. The unit offsets 10" 
to the right with rear mounted 360 degree rotating 
tailwheels making it well suited for operation on gentle 
slopes and mildly contoured approaches immediately 
adjacent to ponds, lakes, streams, drainage ditches, and 
roadways. The seven foot cutting width and 2" to 12" 
cutting height makes it well suited for mowing pastures, 
set aside acres, and row crop fields.

The RCD1884 is compatible with 35 to 60 horsepower 
tractors with a category I three point hitch and is Quick 
Hitch adaptable. It operates at 540 rpm PTO speed and is 
protected with a category 3 driveline with a 2-plate slip 
clutch. Supplied with the cutter is a stump jumper, front 
rubber shield and rear metal band shield.

See “Specifications & Capacities” on page 30 and 
“Features & Benefits” on page 32 for additional 
information and performance enhancing options.

This Operator’s Manual is designed to help familiarize 
the operator with safety, assembly, operation, 
adjustments, troubleshooting, and maintenance. Read 
this manual and follow the recommendations to help 
ensure safe and efficient operation. 

The information contained within this manual was 
current at the time of printing. Some parts may change 
slightly to assure you of the best performance.

To order a new Operator’s or Parts Manual, contact 
your authorized dealer. Manuals can also be 
downloaded, free-of-charge, from our website at 
www.landpride.com.

“Right” or “Left” as used in this manual is determined by 
facing the direction the machine will operate while in use 
unless otherwise stated.

IMPORTANT: A special point of information related 
to the following topic. Land Pride’s intention is this 
information must be read & noted before continuing. 

NOTE:  A special point of information that the 
operator should be aware of before continuing.