Country Home Products 10 HP Manual De Usuario
CALL
TOLL
FREE
1-800-DR-OWNER 17
•
THE DESIGN OF THIS CHIPPER IS FOR CHIPPING LIMBS OR BRANCHES. NEVER USE THIS
MACHINE FOR ANY OTHER PURPOSE AS IT COULD CAUSE SERIOUS INJURY.
MACHINE FOR ANY OTHER PURPOSE AS IT COULD CAUSE SERIOUS INJURY.
•
CONTACT WITH INTERNAL ROTATING PARTS WILL CAUSE SERIOUS PERSONAL INJURY. NEVER
PUT HANDS, FACE, FEET, OR CLOTHING INTO CHIPPER HOPPER OR DISCHARGE OPENING OR
NEAR THE DISCHARGE AREA AT ANY TIME.
PUT HANDS, FACE, FEET, OR CLOTHING INTO CHIPPER HOPPER OR DISCHARGE OPENING OR
NEAR THE DISCHARGE AREA AT ANY TIME.
•
BEFORE PERFORMING ANY MAINTENANCE PROCEDURE OR INSPECTION, STOP THE ENGINE,
WAIT FIVE (5) MINUTES TO ALLOW ALL MOVING PARTS TO COME TO A COMPLETE STOP AND
COOL. DISCONNECT THE SPARK PLUG WIRE, KEEPING IT AWAY FROM THE SPARK PLUG. USE
ONLY A WOODEN STICK TO CLEAR JAMMED MATERIAL AFTER ALL MOVING PARTS HAVE
STOPPED COMPLETELY.
WAIT FIVE (5) MINUTES TO ALLOW ALL MOVING PARTS TO COME TO A COMPLETE STOP AND
COOL. DISCONNECT THE SPARK PLUG WIRE, KEEPING IT AWAY FROM THE SPARK PLUG. USE
ONLY A WOODEN STICK TO CLEAR JAMMED MATERIAL AFTER ALL MOVING PARTS HAVE
STOPPED COMPLETELY.
Recoil Starter Handle
CHAPTER 4
OPERATING YOUR DR 10 HP CHIPPER
This chapter covers the procedures for starting and stopping your new DR 10 HP CHIPPER and discusses
basic operation features.
basic operation features.
Before Starting the Engine
1. Check the oil level every time you use the DR 10 HP CHIPPER.
2. Check the gas level.
3. Turn the Gas Shut-Off valve to the OPEN position (Figure 3).
4. Remove any debris buildup from the machine.
Figure 3
Choke
Gas Shut-Off
Throttle
Gas Fill