Country Home Products 10 HP Manual De Usuario
CALL TOLL FREE 1-800-DR-OWNER 3
CHAPTER 2
GENERAL SAFETY RULES
•
READ THIS SAFETY & OPERATING MANUAL BEFORE YOU USE THE DR 10 HP CHIPPER. BECOME
FAMILIAR WITH THE OPERATION AND SERVICE RECOMMENDATIONS TO ENSURE THE BEST
PERFORMANCE FROM YOUR MACHINE.
FAMILIAR WITH THE OPERATION AND SERVICE RECOMMENDATIONS TO ENSURE THE BEST
PERFORMANCE FROM YOUR MACHINE.
•
THOROUGHLY INSPECT THE AREA IN WHICH YOU WILL BE WORKING AND REMOVE ALL FOREIGN
OBJECTS. LOOK FOR ROPE, WIRE, ETC., AND REMOVE THESE OBJECTS BEFORE CHIPPING. INSERTING
THESE OBJECTS INTO THE CHIPPER COULD DAMAGE THE MACHINE AND/OR CAUSE INJURY.
OBJECTS. LOOK FOR ROPE, WIRE, ETC., AND REMOVE THESE OBJECTS BEFORE CHIPPING. INSERTING
THESE OBJECTS INTO THE CHIPPER COULD DAMAGE THE MACHINE AND/OR CAUSE INJURY.
•
THIS IS A HIGH-POWERED MACHINE, WITH MOVING PARTS OPERATING WITH HIGH ENERGY AT HIGH
SPEEDS. YOU MUST USE PROPER CLOTHING AND SAFETY GEAR WHEN OPERATING THIS MACHINE TO
PREVENT OR MINIMIZE THE RISK OF SEVERE INJURY. THIS MACHINE CAN CRUSH, GRIND, CUT, AND
SEVER PARTS OF YOUR BODY IF THEY ENTER THE INLET OR DISCHARGE AREA OF YOUR CHIPPER.
SPEEDS. YOU MUST USE PROPER CLOTHING AND SAFETY GEAR WHEN OPERATING THIS MACHINE TO
PREVENT OR MINIMIZE THE RISK OF SEVERE INJURY. THIS MACHINE CAN CRUSH, GRIND, CUT, AND
SEVER PARTS OF YOUR BODY IF THEY ENTER THE INLET OR DISCHARGE AREA OF YOUR CHIPPER.
Labels
Your DR 10 HP CHIPPER carries prominent labels as reminders for its proper and safe use. Shown below
are copies of all the labels that appear on the equipment. Take a moment to study them and make a note of
their location on your DR 10 HP CHIPPER as you assemble and
are copies of all the labels that appear on the equipment. Take a moment to study them and make a note of
their location on your DR 10 HP CHIPPER as you assemble and
before
you operate the unit. Replace
damaged or missing safety and information labels immediately.
Make sure to read and observe all Cautions before operating
the DR 10 HP CHIPPER. (#080-0967)
the DR 10 HP CHIPPER. (#080-0967)