Homelite UT08514 Manual De Usuario

When  servicing,  use  only  identical  replacement  parts. 
Use  of  any  other  parts  may  create  a  hazard  or  cause 
product damage.

Always wear safety goggles or safety glasses with side 
shields  during  power  tool  operation  or  when  blowing 
dust. If operation is dusty, also wear a dust mask.

Avoid  using  solvents  when  cleaning  plastic  parts.  Most 
plastics are susceptible to damage from various types of 
commercial solvents and may be damaged by their use. Use 
clean cloths to remove dirt, dust, oil, grease, etc.

Do not at any time let brake fluids, gasoline, petroleum-
based products, penetrating oils, etc., come in contact 
with  plastic  parts.  Chemicals  can  damage,  weaken  or 
destroy  plastic  which  may  result  in  serious  personal 
injury.

All of the bearings in this tool are lubricated with a sufficient 
amount of high grade lubricant for the life of the unit under 
normal operating conditions. Therefore, no further lubrication 
is required.

See Figure 8.
For proper performance and long life, keep air filter clean.
 

Loosen the knob on the air filter cover.

 

Remove the cover.



  Remove the air filter and clean it in warm soapy water. 

Rinse and let dry completely. 

 

Work two drops of oil into the air filter.



  Reinstall the air filter into the air filter base.

 

Reinstall the cover.

 

Tighten knob to secure.

NOTE:  For  best  performance,  the  air  filter  should  be 
replaced annually.

Fig. 8