JVC VN-X35U Manual De Usuario

65

This page is for performing basic setting related to the network.
This page can be used during access using 

AadminB.

● Click [Advanced Settings] to display setting menu.

● Click [Network Basic].

● Press the [OK] button to enable the new settings.

● If the [OK] button is pressed upon entering an invalid value, a warning message will appear and the 

entry will be denied. Press the [Cancel] button to restore the invalid entry to the current value.

● When settings of the Basic page is changed, all services that are currently running will end 

immediately. For example, when changes are made to the Basic page during JPEG/MPEG4 
distribution, distribution will be discontinued and TCP will be disconnected.

A
B
C
D
E

F

G
H

I

Click 

A

For setting the DHCP client function.
Connect VN-X35U to a network environment with a DHCP server when 
DHCP is to be enabled.
If the DHCP server does not exist when DHCP is set to 

AEnableB, VN-X35U 

will start running with the 192.168.0.2 IP address and 255.255.255.0 subnet 
mask in about 2 minutes after startup.
Refer to 

AIP Address SettingsB (A Page 27) for the IP address.

B

For setting the IP address of VN-X35U.

C

For setting the subnet mask of VN-X35U.

D

For setting the default gateway of VN-X35U.
Set as 0.0.0.0 when a default gateway is not set.

E

For setting the host name of VN-X35U.
Specify a name using alphanumeric characters, hyphen (-) or period (.). 
Underscores (_) cannot be used.

F

For setting the address of the DNS server.

G

The MAC address of VN-X35U is displayed in a hexadecimal number.

H

For setting IPv6 to On or Off. (IPv4 is set to On at all times.) When IPv6 is set 
to On in a network that supports IPv6, the address appears in the [IPv6 
Address] field. If the network does not support IPv6, 

ADisableB appears in 

the [IPv6 Address] field.VN-X35U will restart if this item is altered.

I

Displays the IPv6 address.