Cub Cadet 343 Manual De Usuario

22

5.

Reinstall the wingnut knobs to protect the threads
of mounting plate studs.

6.

The mounting plate can remain installed on the
tractor.

Whenever the pivot pins are removed or once a year
apply a light coating of high grade lubricating oil to the
pins. 

Once a year lubricate the front angling pivot shaft with
Cub Cadet 251H EP grease. Use a grease gun to
apply through the front lube fitting (See Figure 49).

The Mechanical Angling Assembly provides five
positions for angling front hitch mounted attachments,
such as the front blade or rotary sweeper.

1.

Remove the fixed shaft from the left side of the
front hitch by removing the two internal cotter pins
and clevis pins (See Figure 50).

2.

With the adjustment handle facing outward,
position the mechanical angling ass’y. between
the pivot plate and hitch yoke. Insert the clevis pins
and secure with the internal cotter pins.

Always disengage the PTO, engage the parking
brake, turn the ignition switch to “OFF” and
remove the key before dismounting the tractor
to adjust the front hitch angle.

1.

Raise the attachment slightly off the ground.

2.

Pull the adjustment handle outward and pivot the
front hitch yoke left or right to the approximate
position desired (See Figure 51). NOTE: the index
holes are 1.25 inches apart.

3.

Release the adjustment handle and pivot the hitch
yoke slightly left and right  until the handle snaps
into the desired index hole.