Petsafe PIF00-12917 Manual De Usuario

10 1-800-732-2677

 

www.petsafe.net 11 

Read all steps before attempting to set the Static Correction Level. 

1. Press the Mode Button and release (3B) when the Receiver Indicator Light 

illuminates Red (3C).

2. The Receiver Indicator Light will emit a series of Red flashes representing the Static 

Correction Level.

3. Increase the Static Correction Level by pressing and releasing the Mode Button 

within 5 seconds of the previous series of flashes.

The Static Correction levels increase in strength from 1 to 6. Pushing the Correction 

Level Button while the Receiver Collar is on level 6 will cause the Receiver Collar 

to revert to level 1. Refer to the Function and Response Table to choose the Static 

Correction level that best fits your pet.

1 Red Flash

1

No Static Correction, Tone Only

Initial Training Mode

2 Red Flashes

2

Low Static Correction

Timid

3 Red Flashes

3

Medium-Low Static Correction

Timid or Average

4 Red Flashes

4

Medium Static Correction

Average Energy

5 Red Flashes

5

Medium-High Static Correction

Average or High 

Energy

6 Red Flashes

6

High Static Correction

High Energy

If your pet enters the Boundary Zone or continues anywhere beyond the Pet Area, this 

feature limits the Static Correction duration to 15 seconds.  While the system locks out 

further Static Correction, the green light will remain on for 10 seconds.
In the unlikely event that your pet leaves the Pet Area, he will not receive a Static 

Correction upon return to the Pet Area.