Snapper 1725580 Manual De Usuario
4
Initial Hitch Installation -
Models with out 3-Point Hitch
Models with out 3-Point Hitch
Figure 1. Install Side Brackets
A. Side Brackets
A. Side Brackets
E. Lockwashers, 1/2
B. Spacers
F. Clevis Pins
C. Nuts, 1/2-13
G. Safety Clips
D. Capscrews, 1/2-13 x 2-1/2
A
F
Figure 3. Install Back Plate
A. Hair Pin Clip
B. Back Plate
C. Hitch Pin
D. Lower Spacer
A. Hair Pin Clip
B. Back Plate
C. Hitch Pin
D. Lower Spacer
A
B
C
D
Figure 2. Install Hitch Assembly
A. Hitch Assembly
B. Lockwashers, 1/2
C. Nuts, 1/2-13
D. Capscrews, 1/2-13 x 1-1/4
A. Hitch Assembly
B. Lockwashers, 1/2
C. Nuts, 1/2-13
D. Capscrews, 1/2-13 x 1-1/4
C
A
D
INITIAL HITCH INSTALLATION -
MODELS WITHOUT 3-POINT HITCH
MODELS WITHOUT 3-POINT HITCH
Install Hitch
1. Mount two side brackets (A, Figure 1) to the same
side of the frame placing spacers (B) between side
brackets (A). Secure with two 1/2-13 x 2-1/2 cap-
screws (D) 1/2 lock washers (E) and 1/2-13 nuts (C)
per side.
brackets (A). Secure with two 1/2-13 x 2-1/2 cap-
screws (D) 1/2 lock washers (E) and 1/2-13 nuts (C)
per side.
2. Install the hitch assembly (A, Figure 2). Secure with
1/2-13 x 1-1/4 capscrews (D), 1/2 washers (B) and
1/2-13 nuts (C)
1/2-13 nuts (C)
3. Install the back plate (B, Figure 3) on the lower spac-
ers (D) and secure to the hitch with the long hitch pin
(C) and hair pin clip (A).
(C) and hair pin clip (A).
A
B
G
D
E
C
B