Intel E5630 AT80614005463AA Manual De Usuario
Los códigos de productos
AT80614005463AA
Boxed Processor Specifications
180
Intel
®
Xeon
®
Processor 5600 Series Datasheet Volume 1
Note:
Actual boxed thermal solution may differ from this image, but installation is similar.
9.3
Fan Power Supply [STS100C (Combo) and
STS100A (Active) Solutions]
The 4-pin PWM controlled thermal solution is being offered to help provide better
control over pedestal chassis acoustics. This is achieved though more accurate
measurement of processor die temperature through the processor’s Digital Thermal
Sensors. Fan RPM is modulated through the use of an ASIC located on the baseboard
that sends out a PWM control signal to the 4th pin of the connector labeled as Control.
This thermal solution requires a constant +12 V supplied to pin 2 of the active thermal
control over pedestal chassis acoustics. This is achieved though more accurate
measurement of processor die temperature through the processor’s Digital Thermal
Sensors. Fan RPM is modulated through the use of an ASIC located on the baseboard
that sends out a PWM control signal to the 4th pin of the connector labeled as Control.
This thermal solution requires a constant +12 V supplied to pin 2 of the active thermal
Figure 9-13. Thermal Solution Installation