Craftsman 486.242112 Manual De Usuario

7

•

Fit the ends of the two upper hopper tubes into the 
ends of a rear hopper tube. Align the holes in the ends 
of the tubes and insert plastic plugs (Q). See fi gure 7.

NOTE: Either side of the tubes can face up.

•  Fit the ends of the two lower hopper tubes into the 

ends of a rear hopper tube. Align the holes in the ends 
of the tubes and insert plastic plugs (Q). See fi gure 8.

NOTE: Either side of the rear hopper tube can face up.

•  Unfold the hopper bag, reverse the fold of the mesh 

wind screen and then lay the bag out fl at with the wind 
screen on top and the Craftsman logo facing down.

•  Insert the ends of the assembled upper hopper tubes 

down through the stitched sleeves in the sides of the 
hopper bag and then slide the tubes back underneath 
the wind screen. See fi gure 9.

•  Place the assembled lower hopper tubes into the 

bottom of the hopper bag and then slide the tubes to 
the back of the bag. See fi gure 10.

•  Attach the ends of the lower hopper tubes to the 

inside of the upper hopper tubes using two clevis pins 
(M) inserted from the inside, and two hair cotter pins 
(L). See fi gure 10.