Woods Equipment CZR2652B Manual De Usuario

24

-  Practice at slow engine and travel speeds with the 

PTO off until fully familiar with the controls.

-  For normal cutting the throttle should be set at the 

full open position.  By using the traction levers to 
speed up or slow down the machine during use, 

maximum control and cutting efficiency can be 
maintained.

-  Using the machine at less than full throttle in 

heavy conditions will cause the engine to labor 
and result in excessive wear.

1.   

With the PTO disengaged, move the parking 

brake to OFF.

2.   

Move both traction levers out of neutral lock.

3.   

Push both traction levers forward evenly to 

drive forward in a straight line.  Pull both traction 
levers back evenly to drive backward in a straight 
line.

4.  Steering - Move one lever forward and one back.  

-

 

Right turn - move the right traction lever back 
toward neutral to slow the right drive wheel.

-

 

Left turn - move the left traction lever back to-
ward neutral to slow the left drive wheel.    

-

 

Reverse right turn - move the right traction lever 
forward toward neutral to slow the right drive 
wheel.  

-

 

Reverse left turn - move the left traction lever 
forward toward neutral to slow the left drive 
wheel.  

Use caution when making turns.  Slow down before 
making sharp turns to help maintain control and to 
prevent torn turf from skidding or spinning tires.  To 
help prevent turf damage, keep both drive tires mov-
ing whenever a turn is made.

TIP:  The best way to make a sharp "zero" turn is to 
come to a stop, get the machine moving in reverse 
with both drive wheels and then power the machine 
around with the outside wheel.  This technique keeps 
the drive tires turning and results in less turf damage.