Alamo FC-0016 Manual De Usuario
ASSEMBLY
A96B 03/06
Assembly Section 3-5
© 2006 Alamo Group Inc.
ASSEMBL
Y
The Components of these machines are quite heavy. Block all components up securely
before working under or putting extremities under such parts.
before working under or putting extremities under such parts.
TONGUE - PULL TYPE
Insert tongue lugs inside mainframe uprights and retain using Bushings 1-3/4OD X 1-1/4 LG & Hitch Pins.
Insert Retaining Clip to Special Pins. See Figure ASM-R-0136.
AXLE ASSEMBLY - PULL TYPE
Attach the Rear Axle to the lugs on the rear of the Mainframe using (3) 3/4 x 3 bolts (#1) bushings 1-1/8OD x
1-1/16Lg (#2) and Locknuts (#3). See Figure ASM-R-0137.
1-1/16Lg (#2) and Locknuts (#3). See Figure ASM-R-0137.
AXLE ASSEMBLY (Semi-Mount & Hydraulic Offset) (Figure ASM-R-0138)
Attach rear axle (1) to lugs on rear of mainframe using 3/4” x 3" bolts (2), 1-1/8” OD x 1-1/16” bushings (3), 1"
OD x 1" bushing (6) (in center), and Locknuts (4). Clamp caster wheel assembly (7) to axle w/ cap (8), using 5/
8” x 2-1/2” bolts (9) and nuts (10). (Figure ASM-R-0138)