Poulan 96042011300 Manual De Usuario

IMPORTANT:  CHECK BELT FOR PROPER ROUTING 

IN ALL MOWER PULLEY GROOVES.
•  Raise attachment lift lever to highest position.
•  If necessary, adjust gauge wheels before op er at ing 

mower as shown in the Operation section of this manual.

• 

ATTACH MOWER SIDE SUSPENSION ARMS (A) TO 

CHASSIS - Position hole in arm over pin (B) on outside 

of tractor chassis and secure with retainer spring.

•  Repeat on opposite side of tractor.

•  ATTACH REAR LIFT LINKS (C) - Lift rear corner of 

mower and position slot in link assembly over pin (D) 

on rear mower bracket and secure with washer and 

retainer spring.

•  Insert end of link (E) into hole in front mower bracket 

and secure with washer and retainer spring (J).

•  Hook end of clutch cable spring (Q) into hole in idler 

arm (R).

• 

Push clutch cable housing guide (P) into bracket, slide 

collar (L) onto guide and secure with retainer spring (K).

•  Install belt on engine pulley (M), in belt keepers (G).

• 

ATTACH FRONT LINK (E) - Work from left side of trac-

tor. Insert rod end of link assembly through front hole 

in tractor front suspension bracket (F).