Great Dane GDB10029 Manual De Usuario

Descargar
Página de 88
Service Transmission - 16
SERVICE TRANSMISSION
Service Transmission
Avoid Fumes
Transmission Oil
The Hydro-Gear transaxle units used in this machine are 
designed to be maintenance free. If service is required, 
contact a Great Dane dealer.
Adjusting Transmission Tracking
1. Park machine safely. (See Parking Safely in the Safety 
section.)
2. Start and run the engine until it reaches normal 
operating temperature.
3. Move machine to an open area for operation.
4. Drive machine forward by pushing speed control lever 
forward slowly.
MX9263
5. If machine does not drive in a straight line, turn tracking 
adjustment knob (A) to compensate.
Adjusting Transmission Neutral Position
1. Park machine safely. (See Parking Safely in the Safety 
section.)
2. Raise drive wheels off the ground, securely support the 
machine and block caster wheels.
3. Move speed control lever to neutral position.
4. Start and run the engine until it reaches normal 
operating temperature. 
5. Observe wheel movement. Wheels should not rotate. 
MX9262
6. Determine which drive motor is in need of adjustment.
7. Remove retaining clip, control rod and swivel from drive 
arm (A).
8. Adjust accordingly by turning swivel up or down control 
rod.
9. Install control rod, swivel and retaining clip in drive arm.
NOTE: If additional adjustment is needed, see your 
Great Dane dealer.
Removing and Installing Drive Belt
1. Park machine safely. (See Parking Safely in the Safety 
section.)
2. Remove mower deck belt guard.
c
 CAUTION: Avoid injury!  Engine exhaust fumes 
contain carbon monoxide and can cause 
serious illness or death.
Move the vehicle to an outside area before 
running the engine.
Do not run an engine in an enclosed area 
without adequate ventilation.
Connect a pipe extension to the engine 
exhaust pipe to direct the exhaust fumes out of 
the area.
Allow fresh outside air into the work area to 
clear the exhaust fumes out.
c
 CAUTION: Avoid injury! Clear area of all 
bystanders before performing this service 
procedure.
A
A