Great Dane GDRZ61-28KHE Manual De Usuario

Operating - 12

MX15340

Do not step on the mower deck when mounting and 
dismounting the machine. Mount the machine from the 
front using the foot plate (A). Park machine safely (see 
Parking Safely in the Safety section) before dismounting.

Keep the foot plate clean.

1. Park machine safely. (See Parking Safely in the Safety 
section.)

2. Slide seat to full rear position.

MX15282

3. Lift seat frame (A) and tilt forward until it rests against 
the hinge stops.

1. Stand on the side of the machine.

2. Push operator seat back and slowly lower seat frame.

1. Sit on the operator seat.

MX15280

2. To adjust the seat front to back, push and hold the seat 
adjustment lever (A) away from the seat.

3. Slide forward or backward to desired position.

4. Release lever.

1. Sit on the operator seat.

2. To lower the seat, turn knob (B) counterclockwise.

3. To raise the seat, turn knob (B) clockwise.

Cutting height can be adjusted from approximately 25

-

125 

mm (1

-

5 in.). Each hole adjusts the height-of-cut (HOC) in 

approximately 12 mm (1/2 in.) increments.

The deck can also be raised and locked in a transport 
position, to provide maximum ground clearance when 
moving the machine from one area to another.

1. Park machine safely. (See Parking Safely in the Safety 
section.)

c

c