John Deere L17.542 Manual De Usuario
Service Lubrication - 30
SERVICE LUBRICATION
Service Lubrication
Grease
The following greases are preferred:
•
John Deere Multi-Purpose SD Polyurea Grease
•
John Deere Multi-Purpose HD Lithium Complex Grease
•
John Deere Moly High Temperature EP Grease
If not using any of the preferred greases, be sure to use a
general all-purpose grease with an NLGI grade No.2 rating.
general all-purpose grease with an NLGI grade No.2 rating.
Wet or high speed conditions may require use of a special-
use grease. Contact your Servicing dealer for information.
use grease. Contact your Servicing dealer for information.
Lubricating Front Axle Pivot
MX10500
•
Lubricate front axle center pivot (A) with one or two
shots of general all-purpose grease.
Lubricating Front Axle Wheel Spindles and
Bearings
Bearings
MX7700
•
Lubricate front wheel spindles (A) and bearings (B), one
on each side, with one or two shots of general all-purpose
grease.
grease.
Lubricating Seat
MX7699
•
Lubricate plastic washers and bushings (A) under the
seat with a general all-purpose spray lubricant.
IMPORTANT: Avoid damage! Use recommended
John Deere greases to avoid component failure and
premature wear.
John Deere greases to avoid component failure and
premature wear.
The recommended John Deere greases are effective
within an average air temperature range of -29 to 135
degrees C (-20 to 275 degrees F).
within an average air temperature range of -29 to 135
degrees C (-20 to 275 degrees F).
If operating outside that temperature range, contact
your Servicing dealer for a special-use grease.
your Servicing dealer for a special-use grease.
A
A
B
A