John Deere 5310 S Manual De Usuario
Service—Every 50 Hours
PY80265,05I0212
–19–11JUL06–1/1
Check Transmission-Hydraulic System Oil
Level
Level
PY4942
–UN–21APR05
A—Dipstick
1. Park on level ground. Put range shift lever in neutral
(N), set brakes and pull fuel shut-off knob to stop
engine.
engine.
2. Wait a minimum of five minutes for oil to settle.
3. Check level at mark given on dipstick (A). Level should
be to full oil level mark .
4. Add oil to filler port if level is low. (See Anti-Chatter
Transmission/Hydraulic Oil in Fuels, Lubricants and
Coolant section.)
Coolant section.)
PY80265,05I0213
–19–12SEP05–1/1
Clean and Check Battery
PY1965
–UN–24FEB04
A—Positive Terminal
B—Negative Terminal
B—Negative Terminal
To access battery, see procedure in Service section.
Put range shift lever in neutral (N), set brakes and pull
fuel shut-off knob to turn engine OFF. Wipe battery with a
damp cloth. Clean and tighten connections if needed.
Check fluid level in each cell, fill to bottom of filler neck
with clean mineral-free water. (See Servicing Battery in
Service section.)
fuel shut-off knob to turn engine OFF. Wipe battery with a
damp cloth. Clean and tighten connections if needed.
Check fluid level in each cell, fill to bottom of filler neck
with clean mineral-free water. (See Servicing Battery in
Service section.)
PY80265,05I0214
–19–11JUL06–1/1
Lubricate Front Axle Pivot Pin
PY4067
–UN–27JAN05
Adjustable Front Axle
A—Adjustable Axle Pivot Pin
Adjustable axle pivot pin (A) also requires lubrication of
the front and rear pivot bushing zerks with multipurpose
grease. (See Fuels, Lubricants and Coolant section).
the front and rear pivot bushing zerks with multipurpose
grease. (See Fuels, Lubricants and Coolant section).
100-1
082206
PN=102