John Deere 5310 S Manual De Usuario
Rockshaft and 3-Point Hitch
PY80265,05I0149
–19–12SEP05–1/1
Adjusting Rockshaft Rate-of-Drop/ Implement
lock
lock
PY4543
–UN–23JAN05
A—Rockshaft Rate-Of-Drop Knob cum Implement
Lock
CAUTION: Excessive rate-of-drop may cause
damage or injury. Fully lowering implement
should require at least two seconds.
damage or injury. Fully lowering implement
should require at least two seconds.
Rockshaft drops faster when a heavy implement is
attached. Adjust rate-of-drop knob so that it is slow
enough to be safe and prevent implement damage.
attached. Adjust rate-of-drop knob so that it is slow
enough to be safe and prevent implement damage.
Turn rockshaft rate-of-drop knob (A), located under the
seat, clockwise to slow rockshaft drop.
seat, clockwise to slow rockshaft drop.
Turn knob counterclockwise to increase rate-of-drop.
Rate-of-drop knob is also called implement lock. When
knob is fully screw in, implement will not lower down even
if position control lever is fully down. Use implement lock
while transporting implement.
knob is fully screw in, implement will not lower down even
if position control lever is fully down. Use implement lock
while transporting implement.
PY80265,05I0150
–19–12SEP05–1/1
Preparing Implement
PY2274
–UN–07JUN06
Category II implements should have the top hole of the
implement mast located 610 mm (24 in.) above the lower
pins. Drill another hole in top mast or extend top mast if
necessary.
implement mast located 610 mm (24 in.) above the lower
pins. Drill another hole in top mast or extend top mast if
necessary.
Category
Mast
Width
Pin Size
Height
Between
Lower Pins
Lower Pins
Lower
Upper
II
610 mm
824 mm
28.7 mm
25.5 mm
(24 in.)
(32-7/16 in.)
(1-1/8 in.)
(1 in.)
55-5
082206
PN=52