John Deere 5310 S Manual De Usuario

Descargar
Página de 172
Ballast
PY80265,05I0168
–19–11JUL06–1/1
Ballasting Front End for Transport
PY2246
–UN–21FEB06
A—Attaching Bolts
B—Starter Weight
C—Nuts
D—Additional Weights
CAUTION: Additional front ballast may be
needed for transporting rear-mounted
implements. When implement is raised, drive
slowly over rough ground, regardless of how
much ballast is used.
CAUTION: Weights are heavy. Use proper lifting
equipment. Up to 6 additional weights, 50
Kg(110 lb)each, can be installed on the basic
weight. Approximate weight of starter weight
(A) is : 65 kg (143 lb). Approximate weight of
QUIK-TATCHa¨ weights (D) are 50 kg (110 lb).
Specification
Starter Weight (Ballast)—Weight
65 kg (143 lb) Each
...............................
QUIK-TATCH
Weight
(Ballast)—Weight
50 kg (110 lb) Each
........................................................
IMPORTANT: Tighten the basic weight attaching
screws (A) to 550 N
m (405 lb-ft) and
the screws (C) on front weights (D) to
230 N
m (170 lb-ft).
Installing QUIK-TATCH
Weights: QUIK-TATCH
weights can be installed on the front of the tractor.
One starter weight and up to 6 QUIK-TATCH
weights
can be installed.
1. Install the basic weight (B) with bolts (A).
2. Place additional weights (D) as required. Secure them
with nuts (C).
QUIK-TATCH is a trademark of Deere & Company
70-4
082206
PN=72