Husqvarna ProFlex 21 Manual De Usuario
English-
29
MAINTENANCE
Maintenance
Maintenance schedule
The following is a list of maintenance procedures that
must be performed on the Rider. For points marked with
footnote number 4, turn to an authorised service
representative.
must be performed on the Rider. For points marked with
footnote number 4, turn to an authorised service
representative.
● = Described in this manual.
❍ = Not described in this manual.
Maintenance
Page
Daily main-
tenance
tenance
Weekly
3
main-
tenance
At
least
once
a year
least
once
a year
Maintenance interval
in hours
in hours
Check for fuel and oil leaks
-
❍
Check the parking brake
●
Check the engine’s oil level
(every refuelling)
(every refuelling)
●
●
Check the fuel pump’s air filter
●
Check the safety switch, seat
●
Check the safety switch, lifting lever
●
Check the safety switch, pedal system
●
Check/clean the engine’s cooling
air intake
air intake
●
●
Check the cutting unit:
●
• securing of the blades
●
• condition of the blades
(sharpness, shape, etc.)
(sharpness, shape, etc.)
●
Check the steering cables
(any play, etc.)
(any play, etc.)
●
Check fastenings (screws, nuts, etc.)
-
❍
Start the engine and blades, listen
for unusual sounds
for unusual sounds
●
Clean under the cutting unit
●
Clean the transmission’s cooling air
intake
intake
●
●
Check the battery’s acid level
●
Check the transmission oil level
●
Check the condition of belts, belt
pulleys, etc.
pulleys, etc.
-
❍
Check for damage
-
❍
Check the air pressure in the tyres
(60 kPa)
(60 kPa)
●
before after
25
50
100
300