Husqvarna LZF6127 Manual De Usuario

CONTROLS

English

-24

The lifting lever is used to place the mower deck in 

the transport position or one of the 17 different cutting 

height positions.
The cutting height is set by placing a peg in the hole 

for the desired cutting height and the peg is then 

locked on the inside (hidden in illustration) with the 

supplied pin.

  Pull the lever backward to the locked 

• 

position to engage the transport position. 

The deck is then fully raised.

  To lower, squeeze the lock handle up to the 

• 

lifting lever while moving the lever forward. 

When the lever meets the set peg, the 

desired height is set.

  The lifting lever can also be used to 

• 

temporarily adjust the cutting height, such 

as when passing over a minor bump in the 

lawn.

8011-753

1. Lifting lever
2. Lock handle
3. Set peg
Mower deck lifting lever

The choke control is used for cold starts to provide the 

engine with a richer fuel mixture.
For cold starts, pull the control out to its extent.

8011-508

The throttle control regulates the engine speed and 

thereby the rate of rotation of the blades, assuming the 

blade switch is pulled out (see Engaging the Mower 

Deck).
In order to increase or decrease the engine speed, the 

control is moved forward or back respectively.
Avoid idling the engine for long periods, as there is a 

risk of fouling the spark plugs.
USE FULL THROTTLE WHEN MOWING, for best 

mower performance and battery charging.

8011-509

1

2

3