Cub Cadet SC2400 Manual De Usuario

1. Disengagement of the 4-wheel drive is 

recommended.

2. Remember that the braking characteristics differ 

between the two and four wheel drive modes. Be 
aware of the current drive mode and use 
carefully.

3. Before turning, always slow down the tractor. 

High-speed turn may cause the tractor to tip over.

4. When traveling on a road, be sure that the Slow 

Moving Vehicle (SMV) emblem is on the tractor 
and is clearly visible. Use the hazard lights and 
turn lights as required by the currently effective 
local laws or regulations.

5. Strictly observe all the currently effective local 

traffic and safety laws and regulations.

6. Turn ON the headlights as required by the 

currently effective local laws or regulations.

7. Always travel at a speed that allows you to 

maintain control of the tractor.

8. Avoid engaging differential lock while traveling on 

a road. It may cause the operator to lose control 
of the tractor.

9. While traveling on a road, do not suddenly turn 

the steering wheel. Such an action can lead to 
loss in the stability of the tractor, and can cause 
an extremely dangerous situation.

10. While on a road, do not attempt to operate an 

implement. During transportation, put the 3-point 
hitch control / cutting height adjustment lever in 
its raised position and lock it with the position 
stop knob. Do not fully close the hydraulic flow 
control / stop knob.

1. Disengage the Power Take Off (PTO), lower the 

implement to the ground, set the forward and 
reverse drive pedal in the neutral positions, 
engage the parking brake securely, stop the 
engine and remove the key from the starter key 
switch.

2. Before leaving your tractor, be sure the tractor is 

completely stopped.

3. Do not park on a steep slope. Rather, park on 

solid, flat, level ground whenever possible. If 
parking on a slope is unavoidable, park the 
tractor across the slope, and lower the implement 
to the ground and chock the wheels.

4. Allow the tractor to cool at least 5 minutes before 

storing.