Cub Cadet SC2400 Manual De Usuario

The service life of the tractor is governed by how 
adequately it is handled and maintained. 
Of course, any newly manufactured tractor has been 
tested; however, various parts must be broken in. 
Therefore, operate the tractor at low speeds for the 
first 50 operating hours, and avoid heavy work or 
operation before the various parts have been 
sufficiently run. The manner the tractor is operated in 
during the breaking-in period greatly affects the 
effective life of the tractor. Therefore, to develop 
maximum design performance and attain the longest 
life of the tractor, the tractor needs to be correctly 
broken in. Handle the new tractor, strictly observing 
the following instructions. 

●NEVER suddenly start or brake.
●In cold weather, ALWAYS fully warm up the 

engine. After warm-up, start operation of the 
tractor.

●NEVER run the engine at a speed higher than 

needed.

●On rough roads or terrains, slow the tractor down 

as necessary. Do not run the tractor at a high 
speed.

The above-mentioned precautions apply not only to 
newly manufactured tractors but also to tractors that 
have been actively used. Nevertheless, we 
recommend that newly manufactured tractors be 
operated by strictly observing these instructions / 
recommendations. 

The quality of the lubricating oil in any new tractors is 
very important. Various parts on a new tractor have 
not been fully broken in, and are not fully fitted with 
each other. As a result, small metal shavings may 
occur while the new tractor is operated, and may 
lead to premature wear or damage of the associated 
parts or components. Therefore, Cub Cadet Yanmar 
recommends that the lubricating oil be changed 
earlier than in the ordinary oil change schedule.
For the recommended oil change schedule, refer to 
the “13. MAINTENANCE”.