Cub Cadet SC2400 Manual De Usuario

■ Inflation Pressure

●ALWAYS keep the tires inflated to the correct 

pressure. NEVER exceed the recommended 
inflation pressure specified in this Operator's 
Manual.

Inflation pressure gradually reduces as time elapses. 
Check the pressure of each tire before starting the 
day's operation and inflate the tires as necessary to 
the recommended pressures. If the tire pressures 
significantly decrease though the tires are correctly 
inflated every day, immediately request your local 
Cub Cadet Yanmar dealer to inspect or replace the 
problem tire(s). 
Before loader work, make sure to check the tire 
pressure and, if necessary, inflate the tire(s) to the 
recommended pressure.
For the appropriate inflation pressure, refer to the 
following table:

■ Wheel Bolt Tightening Torque

Avoid injury:
●ALWAYS keep the wheel bolts tightening to the 

●With the wheel bolts loosened, do not drive the 

Before starting day’s operation, check tightening 
torque of each of the tire wheel bolts and, if 
necessary, retighten to the specified torque. For the 
specified torque, refer to the following table:

Tire size

Inflation pressure

(psi(kgf/cm

2

))

Inflation pressure when an implement such as the front 

loader has been attached to the front of the machine 

(psi(kgf/cm

2

))

Front 18 × 8.50 - 10

20 (1.4)

22 (1.5)

Rear 26 × 12.00 - 12

20 (1.4)

22 (1.5)

Front wheel bolt (ft•lb (N•m))

52 - 59 (70 - 80)

Rear wheel bolt (ft•lb (N•m))

52 - 59 (70 - 80)